AS-Interface | Products | Search Products


	News & Events	The System	Products	Certification	Membership

Products

Search Products

Deutsch | English

Quicklinks

Products

Pluto AS-i v2 AS-i Master and/or Monitor

Manufacturer:

Contact:

Mr. Anders Ingvarsson

Category:

Masters / Gateways

Pluto AS-i v2

AS-i Master and/or Monitor

Order No.:

20-070-11

Certification by:

TÜV Rheinland

Description:

Pluto AS-i v2 is an AS-i module which can be used as a safety monitor and/or AS-i safety master.
This means that the Pluto AS-i v2 can act like a master with full safety control over the AS-i bus meanwhile it also take care of non-safe sensors and actors. Either the Pluto AS-i v2 can be set to monitor mode and then it possible to use a different master and just let the Pluto AS-i v2 take care of the safety monitoring.

Pluto AS-i v2 can control and read AS-i standard nodes, A/B nodes, safety slaves, non-safe analogue slaves and safe-output slaves. Furthermore the Pluto AS-i v2 has the "normal function" of a standard Pluto with hardwired threads of 4 normal safe inputs and 4 In and Out.(These inputs are also safe). The four "In and Out" can also be used for safe analog inputs.
For the safe outputs Pluto AS-i v2 has 4 independent failsafe safety outputs.

The Pluto AS-i v2 is programmed with Jokab Safety software Pluto Manager. The Pluto Manager program is the same for programming all kinds of Pluto PLC:s, were projects are bulit with one or many Pluto connected over a Pluto Can-bus.(Up to 32 Pluto units on one Pluto-Bus) The possibility to mix diffrent Pluto in one project enables connect between diffrent AS-i network.